Drone detector
“SONAR+”

Basic information

This device can detect the presence of video broadcasts from UAVs in the 2.4 GHz and 5.8 GHz bands

Charge battery

Active menu item

Range 5.8 GHz:
Detection level
Band spectrum

2.4 GHz band:
-Detection level
-Band spectrum

Selected parameter

Appearance of the device

Overall dimensions, excluding antennas:

IP degree of protection: IP63

Operating temperature range:

Weight: not more than 200 grams

Charger - USB Type-C

Power supply - built-in battery

Battery life:
when fully charged - at least 4 hours

Means of signaling and indication:

Reception frequency range:

Device characteristics

110 * 75 * 27 mm

-5 .. +50 С

2.4 GHz range: 2390 MHz ... 2510 MHz; 5.8 GHz band: 5150 MHz ... 5950 MHz

3.7 V 4400 mA/h

(not included)

color LCD indicator 128 * 160 dots;
bell with a volume level of 90 dB and vibration motor

Setting the type of alarm

Immediately after switching on, the device is set to alarm with an audible signal. Depending on the signal level from the UAV, the beeping period will change. The higher the signal level from the UAV, the more frequent the beeper will sound

In some cases the audible signal is not suitable.
There is a choice of “SOUND”, “VIBRATION”, “SOUND+VIBRATION”, “NO”.

Use the “+” and “-” buttons to select the “SIGNAL” menu item and confirm with the “P” button. With the “P” button. Next, use the “+” and “-” buttons to select the desired signal type and confirm with the “P” button

Principle of operation

Does not emit electromagnetic waves, works on the principle of radio air scanning. When a drone appears in the protected area, the detector detects it

radius of 1 km

2.4 GHz: 2,390 MHz
5.8 GHz: 5,150 - 5,950 MHz

4 hours battery life
440 mAh
3.7 В

170x55x27 0,2 kg

Waterproof IP63

Additional features

UAV detection thresholds and algorithms

Adjustment of thresholds separately by range

Filtering of impulse noise and narrowband signals

Band-specific interference rejection mode

Adjusting the sensitivity of receivers in the range of 10 - 100 %

Additional features

To be implemented in the serial version of the device

Possibility to update the software at the customer's premises

Protection against unauthorized use (control questions and pin code)

Connectivity to active headphones

Possibility to control the suppressor according to the set algorithm

These functions are not implemented in this prototype

Memorization of settings in non-volatile memory

Possibility to activate UAV hazard indicators by radio (allows to reduce the number of required drone detectors)

Signal source search mode with directional antenna